A-PET(RAPT)

Description:
A-PET(Amorphous-polyethlene terephthalate) is amorphous thermal plastics composed of carbon, hydrogen and oxgen. It will not produce toxic gases during the process of A-PET incineration. It is suitable for vacuum forming, food packaging, boxes folding, UV offset printing, screen printing, stationery, card cases, etc.

Features:
Better transparency and gloss than PVC
Excellent chemical and oil resistance
Excellent gas and water resistant
Excellent impact resistance
Excellent toughness and stiffness
Gamma ray sterilization resistance
Non toxic and odourless




 
PHYSICAL PROPERTIES  UNIT TEST METHOD TYPICAL VALUES
Thinkness mm RPC-001 0.20~1.00
Gloss Value % ASTM D523 at 60° 150↑
Haze Value % ASTM D1003 3↓
Transparency % ASTM D1003 90↑
Specific Gravity g/cm³ ASTM D792 1.34
Tensile Strength psi ASTM D882 7000 min.
Elongation % ASTM D882 100↑
Heating Shrinkage % ASTM D1024 at 100℃×5’ CD     0↓
MD   -6↓
Thickness Tolerance % RPC-001 0.20~0.50:  ±5
0.51~1.00:  ±3
IV Value     0.70↑
TG Value   TESTED BY DSC 70
Melting Point TESTED BY DSC 250
Ignition Temp.   500
Dyne Level dynes/cm  ASTM D2578 34~36
Crystallization Half Life secs By 140℃ 30